Shenzhen Mingyang Digital Technology Co.,Ltd
Honest, Trustworthy, cooperative and win-win situation
Add to Cart
1600W High Power Original Leister Hot Air Gun for Flex Banner Welding Machine
We are a Professional Export Trade company , sale many kinds of machine and materials about the Advertising Industry .
Our company sale many kinds of Flex / PVC Banner Weldind machine and spare parts .
About the Original Leister 1600W Hot Air Gun ,
details as below :
| Product Name | Original Leister 3400W/1600W hot air gun |
| Power16 | 00 W |
| Voltage | 230V |
| Air volume | Max 360L/Min |
| Frequency | 50-60HZ |
| Temperature | 20～700 ℃ distance adjustable |
| Air pressure | 3200 pa |
| Noise level | 65 db |
| Weight | 1.05 kg |
| size | 320*105 mm |
composition :
• Power supply cord
• Main switch
• Potentiometer
• Handle
• air filter
• rubber stand
• heater tube
Application:
► Welding of thermoplastic materials as well as single-ply flexible plastics and modified bitumen in the form of boards, tubes, profiles, lining membranes, coated materials, films, foams, tiles and sheets. The following procedures are possible: overlap welding, welding with rod, with tape, butt welding and melt welding.
► For foaming, ending and sealing of the thermoplastic semi-finished materials and plastic granules.
► Activating and dissolving of solvent free adhesive and fusion adhesives
► Shrinking of heat-shrink sleeves, films, tapes, solder sleeves, preformed and mould part.
► Igniting of wood shavings, paper, coal or straw in furnaces
► Defrosting of frozen water pipes.
► Soldering of copper pipes, solder joints and metal foils.
► Drying of water-damp surfaces.
| Changeable nozzles:
• Do not touch the hot nozzle and make sure to place it on a heat resistant surface because of the fire hazard..
• Put the nozzle on the heater tube and secure the nozzle by the screw on the cap. Use original nozzles only. |
Service and repairs :
♦ Clean polluted air filter with a small brush or replace it
♦ Check mains cable and plug for electrical and mechanical damage.
♦ Clean welding nozzle with a steel brush
Caution:
• The voltage rating stated on the tool must correspond to line/mains voltage
• Protect tools from damp and wet
• The tool much be operated with supervision. Heat can reach combustible materials which are out of sight.
• For personal protecting on the building site, we strongly recommend the tool be connected to a GFCI(Ground Fault Circuit Interrupter)or a RCCB (Residual Current Circuit Breaker)
| Warning :
• Unplug the tools before opening it. • Incorrect use of hot-air blowers can cause fire and explosion hazard, expecially near combustible materials and explosive gases
• Do not touch heater tube and nozzle when they are hot. They may cause burns.Do not point hot air flow in the direction of people or animals |
Thanks for your kind reading ! Any questions or demand contact me freely : )
