Shenzhen Mingyang Digital Technology Co.,Ltd
Honest, Trustworthy, cooperative and win-win situation
Add to Cart
Light Pvc Vinyl Banner Welding Machine / Systems With Leister Hot Air Gun
LC3000C Auto Hot Air Welding Machine
Please Feedback Me To Get More Information .
Specification as below :
| Model | LC3000C |
| Heat coils | Leister brand heat coils |
| Power | 1600W |
| Voltage | 110V / 220V |
| Frequency | 50-60 Hz |
| Weld speed | 1-15 /min |
| Weld width | 2-4 cm |
| Weight | 18 kg |
| Size | 49*30*29 cm |
| Pack | Wooden case |
Operate Attention :
► Any part of this machine being bumped of fallen can cause some damage impossible to be repaired.So please pay attention to carry it.It is suggested to move the machine by manpower and put it down carefully
► The place for installation must be flat and the floor is strong enough to support the machine and moreover, the installation place should close to power supply
► Please check if there is damage or missed parts after unpack the machine.Any problem, please contact us or the local agent immediately
► Please sweep away the anti-rust oil from the machine with detergent and re-lubricate with light lubricating oil after installation
► Keep the installation place no dust and avoiding sunshine
Please Feedback Get More Information .
Operation Step :
1. Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
2.The overlap width of the two pieces is about 3-mm, the width of the nozzle of hot seaming machine.
3.Put the machine nozzle between two overlap pieces.The press-wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
4. Switch on the motor power and then adjust speed.
5.Turn on the movement switch.
6.Press heating power key to adjust temperature.
7.Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
8.Turn the bar by clockwise to cease the automatic work.
9.The operator should control the moving direction and make sure the nozzle connect both with upper and under piece of cloth
| Notice :
♦ If the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed.
♦ If the seaming part is not in right position, please stop to adjust fixing position.
♦ Adjust temperature to zero before turn off the heater.Switch off after 5-10 minutes
♦ Before weld, make sure the clothes are flat so that stick together smoothly.
♦The hot wind of heater cannot touch the press-wheel or the rubber of press-wheel is easy to be burned down. |
Please Feedback Get More Information .
FAQ :
Q : What kind of materials can it weld ?
A : It can weld waterproof tent , flex banner and other outdoor materials that can be hot melt .
Q : Are the work speed and temperature adjustable ?
A : Yes , the work speed and temperature are adjustable .
Q : Is it automatic work ?
A : Yes , It's Automatic weld materials .
Q : Which kinds of hot air gun does it use ?
A : Our Flex Banner Welding Machine used long life Leister hot air gun .
Q : How long is the warranty period?
A : Our company provide one year free Warranty , you can free change spare parts .
Q : What's the MOQ ?
A : The MOQ is One set of Flex Welding Machine .
Advantages 
We assure you :
►With good quality Flex Banner Welding Machine
► Timely offer the best price to you
► Arrange the fast and safe shipping
► Provide one year good after-sales service
Feedback Me :
If any questions or demand about our Auto Hot Air PVC Banner Welding Machine , Please send your kind Inquiry Details at the below , Click " Send " Now Or Contact me Now !
Thank you !!!
Please Send Your Inquiry Details At The Below To Get More Information .