Shenzhen Mingyang Digital Technology Co.,Ltd
Honest, Trustworthy, cooperative and win-win situation
Add to Cart
Waterproof Flat Banner Splicing Hot Air Welder Machine With CE , Auto Work
CE AUTO Hot Air PVC Banner Welder
Machine description :
The automatic banner welding machine is designed to weld plastic materials. It can weld advertising inkjet fabric, inkjet cloth, light box cloth,PVC banner cloth,plastic cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted. It is small, light and easy to operate. It is equipped with temperature feedback sensor. The sener can always monitoring the temperature of the outlet to keep a constant temperature. It uses advanced PID control technology, and adjust the power to make the temperature more constant automatically,the fluctuation is within 1 degrees. This function can make the welding result stronger. It also can avoid leakage. This machine is more suited to fast welding of large
Operate Attention :
|
► Any part of this machine being bumped of fallen can cause some damage impossible to be repaired.So please pay attention to carry it.It is suggested to move the machine by manpower and put it down carefully |
|
► The place for installation must be flat and the floor is strong enough to support the machine and moreover, the installation place should close to power supply
|
|
► Please check if there is damage or missed parts after unpack the machine.Any problem, please contact us or the local agent immediately
|
|
► Please sweep away the anti-rust oil from the machine with detergent and re-lubricate with light lubricating oil after installation
|
|
► Keep the installation place no dust and avoiding sunshine |
Please Feedback Get More Information .
Operation Steps :
Digital Display :
A : Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
B : The overlap width of the two pieces is about 3-mm, the width of the nozzle of hot seaming machine.
C : Put the machine nozzle between two overlap pieces.The press-wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
D : Switch on the motor power and then adjust speed.
E : Turn on the movement switch.
F : Press heating power key to adjust temperature.
G : Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
H : Turn the bar by clockwise to cease the automatic work.
I : The operator should control the moving direction and make sure the nozzle connect both with upper and under piece of cloth
|
Notice :
♦ If the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed .
♦ If the seaming part is not in right position, please stop to adjust fixing position .
♦ Adjust temperature to zero before turn off the heater . Switch off after 5-10 minutes .
♦ Before weld , make sure the clothes are flat so that stick together smoothly .
♦ The hot wind of heater cannot touch the press - wheel or the rubber of press-wheel is easy to be burned down .
|
Please Feedback Get More Information .
FAQ :
Q : What kind of materials can it weld ?
A : It can weld waterproof tent , flex banner and other outdoor materials that can be hot melt .
Q : Are the work speed and temperature adjustable ?
A : Yes , the work speed and temperature are adjustable , speed is 1-15m/min , temperature range is 0-600 degree .
Q : Is it automatic work ?
A : Yes , It's Automatic weld with three wheels , work speed are adjustable .
Q : Which kinds of hot air gun does it use ?
A : Our Flex Banner Welding Machine used long life Leister hot air gun .
Q : How long is the warranty period ?
A : Our company provide one year free Warranty , you can free change spare parts .
Q : What's the MOQ of the PVC plastic welder ?
A : The MOQ is One set .
Our Company:
ShenZhen MingYang Digital Technology company offer high quality plastic welding equipment for accurate plastic welding. Accurate plastic welding is very important for plastic industry.We offer perfect after service, and offer free maintenance for machines. We could offer all spare parts if customer wants to do maintenance by themselves, and offer all the structure diagram for free, includes the welding technical guide.
We assure you :
► With good quality Flex Banner Welding Machine
► Timely offer the best price to you
► Arrange the fast and safe shipping
► Provide one year good after-sales service
Feedback Me :
Any questions or demand about our Auto Hot Air PVC Plastic Banner Welding Machine , Please send your kind Inquiry Details at the below , Click " Send " Now Or Contact me Now !
Thank you !
Please Send Your Inquiry Details At The Below To Get More Information .